Trial Implementation of the hottest borosilicate g

2022-08-19
  • Detail

Borosilicate glass pharmaceutical tube standard (Trial) (Part I)

normal align=center> state food and Drug Administration

normal Ali carton compression machine often used in the packaging industry gn=center> national drug packaging container (material) standard

normal align=center> (Trial)

normal>

normal align=center>

normal align=center>3.3 borosilicate glass pharmaceutical tube

n limits the growth potential. Normal align=center>3.3 pengguiboli yaooyongguan

pharmaceutical tube made of 3.3 borosilicate glass normal align=center>

this standard is applicable to the manufacture of borosilicate glass ampoules and controlled injections.3.3 borosilicate glass tubes for bottles, controlled oral liquid bottles and other pharmaceutical containers

normal> [appearance] take an appropriate amount of this product, and look it up and visually in a bright natural light. It should be colorless transparent or brown transparent; The surface shall be smooth and smooth; There should be no obvious glass defects

normal> cracks no cracks at any part

normal> the bubble line shall be tested with a vernier caliper with an accuracy of value= ".02" hasspace= "false" negative= "false" numbertype= "1" tcsc= "0">0.02mm. The ampoule tube shall not have bubble lines with a width greater than value= ".1" hasspace= "false" negative= "false" numbertype= "1" tcsc= "0">0.10mm; The tubes for controlled injection bottles and controlled oral liquid bottles should not have bubble lines greater than value= ".2" hasspace= "false" negative= "false" numberType with fast cooling speed = "1" tcsc= "0">0.20mm

normal> stones are detected with a vernier caliper with an accuracy of value= ".02" hasspace= "false" negative= "false" numbertype= "1" tcsc= "0">0.02mm. The ampoule tube must not have a diameter greater than

welcome to consult

Copyright © 2011 JIN SHI